EN
PP/PVDF High Flow Cartridge Filter Housing
PP/PVDF altus fluxus cartus filtrans domus adhibet lateralem in et lateralem ex structuram C-typum, et praebetur cum manometro membranaceo PP et valvula campionis ut configuratio standardis. Ex PP/PVDF facta, eius resistentia pressioni et resistentia altis temperaturis superant eas domus filtrantis UPvC. Habet bonam resistentiam corrosioni, acido et alcali, et solventibus organicis, et potest recipere unum cartum filtrans PALL alti fluxus. Domus filtrans PP sustinere potest pressionem 0.8 MPa et temperaturam usque ad 65 °C. Domus filtrans PVDF sustinere potest pressionem 1.0 MPa et temperaturam usque ad 100 °C. Adhiberi potest in chymicis,
electroplating et aliis applicationibus ubi saepe requiritur analysis chymica campionum mediis. Succesive perfecit experimentum fatigationis cyclicae O-0.8 MPa 10 000 vicibus.
- Conspectus
- Eigenschaften
- Categoria
- Per structuram
- PP/PVDF High Flow Cartridge Filter Housing
- Principium Operativum
- Producta Commendata
Plastic filter housing, also known as plastic cartridge filter housing or plastic precision filter, consists of an UPVC, PP, or PVDF housing and a filter bag, melt-blown filter cartridges, or high-flow filter cartridges inside. The housing features a stable structure, strong environmental adaptability, and durability.
It is mainly installed after multi-media pretreatment filtration and before membrane filtration equipment such as reverse osmosis and ultrafiltration. It is used to filter out the residual trace suspended solids, colloids, microorganisms in the water, as well as fine materials (such as tiny quartz sand, activated carbon particles, etc.) after multi-media filtration, to ensure the water filtration accuracy and protect the membrane filtration element from damage by large particles. It has certain price advantages when compared with stainless steel filter housings and FRP filter housings.
Eigenschaften
- Plastic filter housings have good corrosion resistance and can be used in acidic and alkaline environments. They can be applied to fields where stainless steel and carbon steel cannot enter.
- The filter housing features compact structure, beautiful appearance, simple installation and operation, and small footprint.
- The filter housings adopt all-in-one molding and are produced in a standardized manner, which makes it easy to replace and maintain.
- The filter cover and the body are connected and sealed with wide threads or eyebolts, which not only ensures the intact sealing performance of the filter housing, but also brings convenience and speed to the disassembly and installation of the replacement filter cartridges.
- The pressure gauge and exhaust valve are separately installed to make operation easier and will not cause the pressure gauge to vibrate when exhausting.
Categoria
By Filtration Mode
-
- Inside-out filter housing: Inside-out type refers to liquid flowing from the inside of the filter cartridge to the outside, and impurities being retained inside.
- Outside-in filter housing: Outside-in type refers to liquid flowing from the outside to the inside, and impurities being retained outside of the filter cartridge.
Per materiam
- Casa de filtru UPVC (clorură de polivinil rigid): Prezintă rezistență puternică la coroziune, rezistență scăzută a fluidului, rezistență mecanică ridicată și etanșeitate bună la apă.
- Casa de filtru PP (polipropilenă): Are rezistență la impact bună, stabilitate chimică bună și efect anti-coroziv bun.
- Casa de filtru PVDF (fluorură de poliviniliden): În afară de rezistența chimică bună și rezistența la temperaturi înalte, are, de asemenea, rezistență bună la oxidare, rezistență la intemperii și rezistență la coroziune.
Per structuram
PP/PVDF High Flow Cartridge Filter Housing
PP/PVDF high flow cartridge filter housing uses side-in and side-out C-type structure design, and comes standard with PP diaphragm pressure gauge and sampling valve. Made of PP/PVDF, its pressure resistance and high temperature resistance exceed those of UPVC filter housing. It offers excellent corrosion resistance, acid resistance, alkali resistance, and organic solvent resistance, and accommodates one PALL high flow filter cartridge. PP filter housing withstands pressure up to 0.8 MPa and temperature up to 65 °C. PVDF filter housing withstands pressure up to 1.0 MPa and temperature up to 100 °C. It is suitable for chemical, electroplating, and other applications requiring frequent chemical analysis of medium samples. It has successfully passed O-0.8 MPa 10,000-cycle fatigue test.
Principium Operativum
It adopts inside-out filtration mode. The raw liquid flows into the filter cartridge from the inlet, and the filter cartridge uses tiny pores for mechanical filtration. Under the action of pressure, the filtrate flows out through the filter cartridge and flows into the designated container through the outlet of the filter housing, while the impurities are retained in the filter cartridge. High flow filter cartridges have a long service life, generally 3–4 times higher than ordinary filter cartridges. They have a larger filter area and a higher flow rate than ordinary filter cartridges in housings of the same size.
